If you want to buy AMSOIL Products, visit the AMSOIL On-Line Store

Just Say No to Aftermarket Additives

The performance benefits of aftermarket additives are mostly unsubstantiated

AMSOIL has long discouraged motorists from using any kind of aftermarket lubricant additive. After all, AMSOIL synthetic lubricants use the finest quality synthetic basestocks and additive systems. AMSOIL's response to the question "Should aftermarket additives or aftermarket products be added to AMSOIL motor oils?" is " No, you don't need them. AMSOIL motor oils are formulated under the strictest quality control standards to provide superior lubrication performance. Additives cost money and only detract from the quality of AMSOIL motor oils." Additionally, not only do they detract from the quality of the motor oil, but they can also be damaging to your engine.

A perfect example of why AMSOIL discourages use of aftermarket additives is the Federal Trade Commission's (FTC) recent lawsuit against zMax auto additives, seeking to halt false and misleading advertising and gain refunds for customers who purchased the products. According to the FTC, the enhanced performance benefits zMax claims its products provide are totally unsubstantiated, and in the same tests cited to support performance claims, motor oil treated with zMax actually produced more than twice as much bearing corrosion than motor oil by itself. They further allege that the three different zMax products- an engine additive, a fuel line additive and a transmission additive- are nothing more than tinted mineral oil.

The complaint states that since at least May of 1999, zMax has aired infomercials promoting its "Power System", a $39 package of three additives to be used in the engine, fuel line and transmission of automobiles. The infomercials are quite convincing, even going as far as featuring testimonials from various consumers and race car drivers making such claims as, "I was averaging about 22 miles to the gallon on the highway. I installed the zMax and so I jumped right up to about 28 miles per gallon" and "zMax guarantees a minimum of 10% gas mileage increase." Other advertising claims "zMax with LinKite has the scientific, CRC L38 proof it takes you car to the Max!" and 'Why zMax Works- Cuts carbon build-up on valve stems 66%; Lowers wear on valve stems 66%; Lowers wear on piston skirts 60%; Reduces blow-by leakage 17.7%; Increases combustion efficiency 9.25%; Lowers fuel consumption 8.5%- results of an independent CRC L38 test."

The CRC L38 test is a standard auto industry test which measures the bearing corrosion protection properties of motor oils. According to the complaint, in early 1997 an independent testing facility performed two CRC L38 tests of the zMaz products. The results showed motor oil treated with zMax additives produced more than double the bearing corrosion as motor oil alone. According to the FTC, the defendants eliminated the bearing corrosion results, as well as all other negative results, to produce one "report" from the two sets of tests, using this "report" in its infomercials and on its website.

The FTC charge alleges that zMax did not possess and rely on reasonable substantiation fro the following product claims:

increases gas mileage by a minimum of 10%, reduces engine wear, reduces or eliminates engine wear at startup, reduces engine corrosion, extends engine life and reduces emissions.

The FTC also alleges that the defendants falsely represent that the results of the CRC L38 test prove that zMax:

increases gas mileage, reduces engine wear, extends engine life, lowers fuel consumption by 8.5%, lowers wear on valve stems by 66%, lowers wear on piston skirts by 60% and cuts carbon build-up on valve stems by 66%

Finally, the FTC charges that zMax does not have substantiation for the representation that the testimonials and endorsements shown in the zMax advertising are "the actual and current opinions, findings, beliefs, and/or experiences of those consumers; and typical or ordinary experience of members of the public who use the product."

The lawsuit against zMax is the latest in a long line of FTC charges against auto additive manufacturers. The FTC has previously halted allegedly deceptive advertising by the marketers of Dura Lube, Motor Up, Prolong, Valvoline, Slick 50, STP and other major brands of engine treatment systems.

End of Article

Here is my professional opinion as a Lubrication Specialist, Mechanical Engineer and Truck/Automotive Engineer (not only is it my opinion, but it is backed by proven scientific research and testing by some of the worlds best chemists and engineers):

Stay away from all aftermarket additives!

You simply do not need them and you surely don't need the problems they may cause with your engine. If you're still not convinced then think about this statement:

The major oil companies, including AMSOIL, are staffed with, bar none, some of the best chemists, scientists and engineers the world has to offer. Now, don't you think that if they determined that their motor oil was lacking an additive that they would blend it in their additive package? They obviously have the technology and resources and the financial backing to do it. Then why don't they? The answer is simple: They are not needed!

How can it be that some fly by night additive manufacturer can have a miracle, cure-all additive without knowing the chemistry of the oil it will be used in? The answer is, they don't. They simply are out to get your money by using false and deceptive advertising to appeal to your desire to have what they are selling in your engine. They are masters at marketing, not science, chemistry or engineering and I would equate them to nothing more than snake oil companies. Thank goodness for the FTC that is actually doing what it is supposed to be doing; protecting the consumer and going after these companies and hopefully put them out of business.

More: Aftermarket oil additives - modern snake oil salesmanship exposed!

AMSOIL is the undisputed leader in synthetics.............

Since 1972, AMSOIL Synthetic drivetrain LUBRICANTS have proven to be the highest performance engine oils, greases, transmission fluids, and hydraulic and differential gear oils on the market. 
But the other key issue is nanofiber filtration. 
We now cover oil filters, air filters and other fluid filters like NO-ONE else can.  AMSOIL offers the highest performance, most cost-effective, most comprehensive filter line on earth.  Consider...

OIL FILTERS:

Until now, Nanofiber filtration technology has been used exclusively in heavy duty applications, including the US ARMY Abrams M1 tank. AMSOIL Ea Filters are the first and only filter line to bring this technology to the auto/light truck market.

Additionally, consider bypass filtration systems for commercial and fleet applications in cars and light, medium and heavy trucks which can filter particles down to less than one micron and are 89% efficient at 1 micron, making oil changes virtually unnecessary and virtually eliminating engine wear.  (A standard full-flow oil filter can only filter to 20 microns with any reasonable efficiency, but 5-25 microns is widely accepted as the wear-particle size range.)  Easy to install, these oil filter systems have been proven by millions of miles of over-the road trucks, construction equipment and fleet service. And we use these on our personal diesel pickup trucks: my Duramax 2500HD has over 60,000 miles since the last oil drain, the oil analysis looks perfect, and the appearance of this diesel oil looks like a gas engine with 3,000 miles on the oil.

AIR FILTERS:

The MOST IMPORTANT filter on the M1A1 Abrams battle tank is its' nanofiber air filter. 
The MOST Important filter on YOUR vehicle is also the air filter.

It's far better, and easier, to keep wear particles out of the engine than it is to attempt filtering them out of the engine oil.  Yet filter companies and vehicle manufacturer's are strangely silent about actual air filter performance and engine needs.  Now AMSOIL offers world-leading breakthrough Ea air filters with exclusive nanofiber technology.  Based on battlefield-proven air-induction systems used in military ground and air vehicles, this high-technology filtration is now available for consumer use!  Ea filters are guaranteed for 4 years, 100,000 miles, and have OEM certified fitment for your vehicle.  The engineering rule of thumb for damaging wear particle size is 5 to 25 microns.  Incredibly, these filters are 100% efficient at removing particles of 3 microns, and are 80% effective at removing particles of a 1 micron size.  This means that NO WEAR PARTICLES CAN GET PAST OUR Ea AIR FILTERS!  AND, they're less expensive to use than ANY other air filter.

For Power Sports applications, AMSOIL offers a line of oiled-foam filters.  These filters provide better performance than oiled-gauze air filters, and are used almost exclusively in most off-road applications including baja, dirt-track racing, and motocross.

For light to heavy trucks, both gas and diesel engines, AMSOIL's partnership with Donaldson provides you with the best performance and most cost-effective air filtration systems in the world.  These include both Powercore and Nanofiber technology filters.  We have the full line of  Donaldson Filters Now Available , including air, fuel, water, oil and hydraulic filters, with exclusive performance warranties (no one else in the industry offers filtration performance warranties).  Contact us for specific recommendations, or see our Diesel Page.

Air Induction Systems:

AMSOIL offers a growing line of the only OEM certified air induction filtration systems on the market.  Offering dramatic airflow improvements for gains in horsepower, fuel economy, and towing torque, they also keep wear particles out of your engine better than any marketed product.  Current air inductions systems include the 7.3 liter PowerStroke.  In addition, AMSOIL has released a full line of nanofiber universal air induction filters (EaAU) designed to replace stock oil wetted gauze or foam conical filters that were supplied with custom induction systems produced by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and more. Whether your air induction system is in a gasoline street-rod, or a diesel truck, you have great airflow but you need better filtration than oiled gauze.  AMSOIL Ea Air Induction Filters are dry no-oil filters that offer far better efficiency, 50 times the capacity, excellent airflow and are easily cleanable.

    GM, Dodge & Ford diesel air-intakes are Here!

Got a Hummer H2 or H3?  How about a newer Ford PowerStroke?  Then you already have superb nanofiber air filtration.  But we offer the real PowerCore replacement air filter for your Hummer or PowerStroke, at a much lower cost than the dealerships!

WHY SWITCH TO AMSOIL LUBRICATION AND FILTRATION TECHNOLOGIES?

• AMSOIL products saves you time and money.  With recommended extended drain intervals, AMSOIL performance typically costs LESS per year than conventional oil changes.

• The only 25,000 mile/one-year and 35,000 mile/one-year motor oils in the world.

• A vehicle lubrication solution with far less environmental impact, using an estimated 87% less oil and 5-10% less fuel !

• The only oils and filters with a warranty for GUARANTEED performance!

• Exceeds the most stringent performance specifications of all major U.S. and foreign automotive and truck manufacturers.

• Provides up to four-times the wear protection of other motor oils.

• Increases the mileage life of your vehicle.

• Improves fuel economy.

• Increases at-wheel horsepower.

• Lowers transmission and differential operating temperatures and delivers better shifting, even in heavy towing.

• Lowers fleet maintenance costs by lowering the costs of both scheduled maintenance, and mechanical repairs.

• Lowers fleet capital costs by dramatically extending vehicle service-life.  (Vehicle mileage typically extended 20 to 100%.)

• Diesel oil and filtration products designed to deliver more than 1,000,000 miles for over-the-road trucks before engine overhaul.

• Used by many national racing teams, fleets, police departments, fire departments, ambulance fleets, construction firms and trucking companies.

WHY WORK WITH DMT TECHNICAL?

DMT Technical operates Ultimate-Synthetic-Oil.com as part of a group of highly skilled team of OEM Engineers and Lubrication and Filtration Specialists.  In fact, we are the ONLY such group on the internet, as well as the largest AND fastest-growing AMSOIL Dealer organization in the nation.  You too, can join our group when you become an AMSOIL Dealer and take advantage of all that we offer as you use products in your own vehicles or begin your own AMSOIL business. You cannot find a more knowledgeable and skilled group of Dealers anywhere. 

In addition, as a Dealer in our group you will receive exclusive unlimited product, technical and business support from the only group of Truck and Automotive Engineers and Lubrication Specialists on the net.  That's priceless - yet free - vital support that can make a huge difference to a growing business.

We do not run our business purely on the internet. We also have numerous commercial, industrial, trucking, excavating, construction, logging, police, racing and many more accounts that we support and service on a regular basis. We have several fully stocked warehouses and fully equipped shop facilities. This provides us with excellent knowledge of the products, equipment and the business and the ability to respond immediately to any of your needs. We will use this knowledge and experience to help you get started so you too can achieve your goals.

We possess the skills, desire and knowledge to answer questions, solve problems, improve efficiency, reduce downtime, maintenance costs and increase the durability and life of all of your vehicles.

Read what our satisfied customers have to say about us. Read through our website. Contact us with any questions. If you decide to become an AMSOIL Dealer you will be joining, in our opinion, the most skilled AMSOIL group there is. We will help you get started and provide you with the tools and information in order to be successful in this business or with technical and product assistance to use AMSOIL products in your own vehicles.

To get additional information:

We offer several options to receive information on AMSOIL. We welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Our AMSOIL Dealer Group is led by a Truck/Automotive Engineer and Lubrication Specialist with over 19 years experience. This exceptional benefit is unavailable elsewhere.

Please, email us at Brian@Ultimate-Synthetic-Oil.com and we will send you an exclusive comprehensive package of product, technical and business information. If you are serious about AMS OIL products and the business opportunity this is the best option. You will receive extensive technical and business support from both myself and my Direct Jobber, a Detroit, Michigan Truck/Automotive Engineer and Lubrication Specialist with over 19 years experience. We look forward to helping you learn about AMSOIL.

Or for a smaller, very general information package (which includes a catalog and Dealer application) you can request information via any of the links below.  Please note that your information is always held in confidence per our Privacy Policy, and will never be sold, loaned or otherwise distributed.

To request a FREE Factory Direct Catalog by MAIL

To Immediately Download a FREE Factory Direct Catalog

For Information on Becoming an AMSOIL Dealer

To Buy AMSOIL Products in the AMSOIL On-Line Store

To Sell AMSOIL in Your Store or Purchase For Use in Your Businesses Equipment

To visit the AMSOIL Corporate Website for Product and Business Opportunity Information

AMSOIL is Proudly Made in the U.S.A.

AMSOIL is owned by Americans.

AMSOIL is America's Oil.

Home | Contact Us | On-Line Store | Privacy Policy | Links

DMT Technical

AMSOIL Ultimate Synthetic Oil

Brian Dobben, BSMT

119 Norlick Drive

Bryan, Ohio  43506

Phone: (419) 630-0874

E-mail: Brian

Copyright Information

Copyright 2000 through 2008. All Rights Reserved. No part of this website may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without prior written permission. Special undetectable methods are used that will identify any of this material copied, reworded/re-written and published to the web.